Schlagwort: sata

Ubuntu Vivid Debian: Kernel I/O Errors SSD SATA NVIDIA Chipsets

If you use a PC with a SSD Drive and a Motherboard which uses NVIDIA chipsets you may see Errors on boot Command „dmesg“ Output like.. Buffer I/O error on device sdc, logical block 41 ata5: EH complete ata5: EH in SWNCQ mode,QC:qc_active 0x1 sactive 0x1 ata5: SWNCQ:qc_active 0x1 defer_bits 0x0 last_issue_tag 0x0 dhfis 0x1 dmafis 0x1 sdbfis 0x0 ata5: ATA_REG 0x41 ERR_REG 0x84 ata5: tag : dhfis dmafis sdbfis sactive ata5: tag 0x0: 1 1 0 1 ata5.00: exception Emask 0x1 SAct 0x1 SErr 0x300000 action 0x6 frozen ata5.00: Ata error. fis:0x21 ata5.00: cmd 60/08:00:07:04:00/00:00:00:00:00/40 tag 0 ncq 4096 […]

FreeBSD: Clicking noise Harddrive SATA WDC WD5000LPVX SATA 3 Drive on FreeBSD 9.1

FreeBSD: Clicking noise WDC WD5000LPVX SATA 3 Drive on FreeBSD 9.1 same like in Linux: APM Funktion starts/stops the heads and make click sounds, not needed on a Server. To disable like in Linux with hdparm on FreeBSD do: If you want to disable APM (Advanced Power Management) on your hard drive to reduce heads movements and increase your hard drive life you can do that very easy by using ataidle app from FreeBSD’s Ports: cd /usr/ports/sysutils/ataidle make install clean; rehash Then to disable APM on your hard drive run: ataidle -P 0 /dev/ad0 We can start ataidle app at […]

Linux Bug: SATA failed command: WRITE FPDMA QUEUED ata3.00 ncq freeze hang

Problem: If you copy or install Files from Disk to Disk somtimes the fresh installed Debian Ubuntu Linux in Textmode (server minimal setup) current kernel freezes or lost connect to the Disks. Take a CLOSER LOOK the Error often affects ALL DISKS !! If only one Disk  affected replace the Drive to SATA600 Hardware:  Asus M4n75TD NEW with Phenom 1090T X6 and 8GB Ram and /dev/sda: Model=Hitachi, FwRev=GM4OA52A, SerialNo=GEA530RF1RDDGA Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=56 BuffType=DualPortCache, BuffSize=15118kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes:  pio0 pio1 pio2 pio3 pio4 DMA modes:  […]