Tag: lenny

Linux Bug: SATA failed command: WRITE FPDMA QUEUED ata3.00 ncq freeze hang

Problem: If you copy or install Files from Disk to Disk somtimes the fresh installed Debian Ubuntu Linux in Textmode (server minimal setup) current kernel freezes or lost connect to the Disks. Take a CLOSER LOOK the Error often affects ALL DISKS !! If only one Disk  affected replace the Drive to SATA600 Hardware:  Asus M4n75TD NEW with Phenom 1090T X6 and 8GB Ram and /dev/sda: Model=Hitachi, FwRev=GM4OA52A, SerialNo=GEA530RF1RDDGA Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=56 BuffType=DualPortCache, BuffSize=15118kB, MaxMultSect=16, MultSect=off CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes:  pio0 pio1 pio2 pio3 pio4 DMA modes:  […]

Thinkpad R50p ATI xserver hanging freeze sometimes Debian Lenny

Hardware: R50p with ATI Graphic 128MB 01:00.0 VGA compatible controller: ATI Technologies Inc M10 NT [FireGL Mobility T2] (rev 80) System: Debian Lenny 5.0 Driver: fglrx Solution: – install cpufrequtils #sudo apt-get install cpufrequtils – edit #nano /etc/initrd/cpufrequtils – change line “ondemand” to “performance” – check System #dmesg – System show “unstable clocksource” last line – edit #sudo nano /etc/boot/menu.lst – add to Kernelparametes line /vmlinuz-2.6.26-2-686 root=/dev/hda3 ro quiet vga=normal clocksource=acpi_pm ..reboot This will run System on max. Speedstep and Videos does’nt hang X-Server. Should help on other Thinkpads to with ATI Chip’s

Thinkpad R50p ATI xserver hanging freeze sometimes Debian Lenny

Hardware: R50p with ATI Graphic 128MB 01:00.0 VGA compatible controller: ATI Technologies Inc M10 NT [FireGL Mobility T2] (rev 80) System: Debian Lenny 5.0 Driver: fglrx Solution: install cpufrequtils #sudo apt-get install cpufrequtils edit #nano /etc/initrd/cpufrequtils change line “ondemand” to “performance” check System #dmesg System show “unstable clocksource” last line edit #sudo nano /etc/boot/menu.lst add to Kernelparametes line /vmlinuz-2.6.26-2-686 root=/dev/hda3 ro quiet vga=normal clocksource=acpi_pm ..reboot This will run System on max. Speedstep and Videos does’nt hang X-Server. Should help on other Thinkpads to with ATI Chip’s