If you run a embedded Linux PC like raspi often some Linux Commands fail without error messages, cause the hardware performance is low tech. Same i have seen on the split command.. to split a 50GB Photos-Archive File to 4Gb on a USB Drive i found out that: sudo split -b 4096m -d -u Photos.tgz Photos-Archive_ fix the job.. Cause option -u disable IO-Caching over the 2.0 USB Port to the RAM of the raspi that the Data of the Output Stream is written direct to the Drive.
If you are a Newbie on AWS Glacier Cloud Backup you want to use a simple Backup Uploader you can use FastGlacier inside Wine! Major Info: Glacier puts only Files up to 4GB size, split 50GB Tar/Zip Files to 4GB!! Setup AWS free Account !! Go to IAM create User, set User Role to Glacier full access Write down User and Password key at IAM now go right to you loved Cloud Area like Frankfurt or Asia Setup new vault, logout.. install wine install winetricks dotnet40 Framework install FastGlacier have fun.. sudo apt-get install wine sudo apt-get install winetricks Run […]
If you use a Toshiba Canvio 3tb Drive at a raspi then smartmontools will not see the usb drive. Try: sudo smartctl -t long -d sat -s on /dev/sdb -t test long or short -d drive protocol sata = sat -s enforce smart which is off by the usb drive firmware wait XXX Minutes then: sudo smartctl -H -d sat -s on /dev/sdb get status..
Here some Bookmarks if you want to try Amazon AWS Cloud Services like S3 (Cloud File Storage), EC2 (VM Instances..) Howtos / Basics : https://github.com/open-guides/og-aws#aws-data-transfer-costs Remark: AWS Services mostly priced by data transfers and online time! Checkout daily “Billing Monitor” ! Amazon AWS: https://aws.amazon.com/ Remark: S3 is the Standard Cloud Storage, cheaper is S3-IA or long term Backups use “Glacier” where you first upload files to S3 and set a “Rule” on a “Bucket” move files to Glacier Long Term Backup! Amazon Admin Console: https://aws.amazon.com/de/console/ Security: Howto Create ENCRYPTED Containers for AWS on Linux? Klick At the End.. don’t forget […]
If you upgrade or install Ubuntu to 18.04 the last and current LTS Version you have may asked yourself “what the hell is snap loop device?” Easy Snap was hidden built in to print MONEY, sure?? YES see manpage snap.. ” BUY A SNAP !!” .. its a new try to get money since Amazon Shop Link implementation.. like others from Appstores.. Howto get rid off? Removing of snapd with purge app Apps by deps.. # sudo apt-get remove snapd –purge Some may ask do i need snaps? No cause most packages still live at the debian apt repository Snap […]
If you use a TP Link Router like 3600, 4300 or a other brand with ATH9K Chipset you should upgrade to OPENWRT 18.06 with Kernel 4.9 Tested: OpenWrt 18.06.0 r7188-b0b5c64c22 / LuCI openwrt-18.06 branch (git-18.210.69179-6df9a57) – Atheros AR9344 rev 2 cause: more stable less load no ath9k Wifi Lookup on high transfers Same seen on other TP Link Routers like 841 Series, remark last Version 13 not supported Hope that the Freifunk Software will be updated fast! More Information go: https://openwrt.org/